
SOLIOM CAMERA TROUBLESHOOTING AND SOLIOM SOLAR CAMERA SETUP METHODS
Soliom solar Camera Setup divided into 4 parts:
- Soliom Support before Installation
- In Soliom App Setup
- Soliom solar camera setup support to Physical Installation
BEFORE INSTALLATION
- Charge your soliom security camera system setup.
- Soliom camera troubleshooting Make sure the distance among your mobile phone,
Router, and the camera is no more than 50cm before you connect the camera with the App, ensuring the WiFi signal strength on your phone is good. 3. Two hours necessary to charge your solar camera in front of sun.
RESET
If the soliom-camera-setup malfunctions for any reason,reset it using the included pin.Press and hold the included button until you hear the following voice,”SYSTEM RESET”. It’s one of the easiest parts of soliom camera troubleshooting.
PRODUCT IMAGE BELOW:
CHARGING
Please charge the soliom security camera system setup about 5 hours, by plugging it into a power source using the provided USB cable. After connecting the camera with App, the App should indicate for you the status level of the battery. Normally users receive the camera 80% charged, but we would recommend that users completely charge it before the installation process.
INSERT SD CARD
Before the first use, please install the microSD card, then format the SD card to FAT32 format (Application to Windows system ONLY). The soliom doorbell setup only support ts class 10 SD cards with at least a 8GB capacity and a maximum capacity of 64GB.
SOLIOM APP SETUP
HOW TO USE SOLIOM APP
- Download the Soliom App (works only with iOS & Android devices)
Please locate the“SOLIOM” in your Google Play store or to download the needed App.
- Turn on the soliom camera
Press the power button to turn on the soliom-camera-setup, after 3 seconds, LED flashes blue. Then you will hear the following voice “ The camera is ready to be paired”.
SOLIOM CAMERA PHYSICAL INSTALLATION
- Our team can soliom 1080p wireless security camera setup outside in the sunshine or indoor used its depend on your requirement.
There are fews points note in your min during physical installation:-
CHECK YOUR CAMERA SIGNAL STRENGTH
RECOMMENDED
HEIGHT TO INSTALL THE CAMERA
We suggest installing the soliom bird s60 setup about 8ft.. You may adjust the height/camera angle according to the live view in your mobile.
SOLIOM LED STATUS
FIRST CATEGORY
Add a description about this category: soliom solar camera setup, Soliom Support
TURN ON THE CAMERA
LED flashes green once and goes off and LED flashes blue of soliom solar camera setup.
PIR WAS TRIGGERED
For soliom 1080p wireless security camera troubleshooting: you can check the LED stays blue of soliom doorbell setup.
CONNECT NETWORK SUCCESSFULLY
For soliom camera troubleshooting: you can check the LED stays blue of soliom solar camera setup.
RESET
For soliom camera troubleshooting: you can check the LED stays blue of soliom solar camera setup.
CAMERA WORKING
For soliom camera troubleshooting: you can check the LED stays blue of soliom bird s60 setup.
STANDBY MODE
For soliom camera troubleshooting: you can check the LED goes off of soliom solar camera setup.